Showing 341–360 of 364 results
-
Flat End Taper, Cross Cut Tungsten Carbide Burs Fg 5 Pcs/Pk
0$7.00Flat end taper, cross cut tungsten carbide burs FG RA create diverging preparation walls ideal for indirect restorations. Tapered shape helps maintain full-length enamel rod margins on convex tooth surfaces.
Cross-cuts increase cutting efficiency.
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; FG long 25mm; RA 22mm; RA long 26mm. -
Cylinder, Cross Cut Tungsten Carbide Burs Fg 5 Pcs/Pk
0$7.00Cylinder, cross cut tungsten carbide burs FG RA create a preparation with parallel walls and a flat floor, useful for establishing the periphery of a preparation.
Cross-cuts increase cutting efficiency and facilitate cutting dentin at lower speeds for improved tactile response x2.
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; FG short 16.5mm; FG long 25mm; RA 22mm; RA long 26mm. -
X-Mas Tree, 3 Slided Tungsten Carbide Burs Fg 5 Pcs/Pk
0$7.00X-mas tree, 3 slided tungsten carbide burs FG are used for carving of tooth pattern (Morphology).
Head Sizes: 0.1mm – 100mm; Shank Types: FG; Shank Diameter: FG 1.6mm; Total Length: FG 19mm. -
Pear, Plain Cut Tungsten Carbide Burs Fg 5 Pcs/Pk
0$7.00Pear, plain cut tungsten carbide burs FG RA create a preparation with converging walls and round internal line angles, ideal for creating mechanical retention and maintaining full-length enamel rod margins on pit and fissure surfaces.
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; FG short 16.5mm; RA 22mm.
-
Flat End Taper, Plain Cut Tungsten Carbide Burs Fg 5 Pcs/Pk
0$7.00Flat end taper, plain cut tungsten carbide burs FG create diverging preparation walls ideal for indirect restorations. Tapered shape helps maintain full-length enamel rod margins on convex tooth surfaces.
Head Sizes: 0.1mm – 100mm; Shank Types: FG; Shank Diameter: FG 1.6mm; Total Length: FG 19mm; FG long 25mm.
-
Cylinder, Plain Cut Tungsten Carbide Burs Fg 5 Pcs/Pk
0$7.00Cylinder, plain cut tungsten carbide burs FG create a preparation with parallel walls and a flat floor, useful for establishing the periphery of a preparation.
Head Sizes: 0.1mm – 100mm; Shank Types: FG; Shank Diameter: FG 1.6mm; Total Length: FG 19mm; FG long 25mm. -
Inverted Cone Tungsten Carbide Burs Fg 5 Pcs/Pk
0$7.00Inverted cone tungsten carbide burs FG RA are used primarily for producing undercuts at the junction of the pulpal floor and lateral walls in occlusal (Class I), cervical (Class V) cavities, and in the occlusal locks of the Class II cavities. Inverted cone burs are also useful for flattening pulpal and gingival walls.
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; RA 22mm.
-
Ball Round, Plain Cut Tungsten Carbide Burs Fg 5 Pcs/Pk
0$7.00Ball round, plain cut tungsten carbide burs FG RA are for caries excavation, cavity preparation, and root canal access. Smaller sizes often used for single surface cavities, medium sizes often used for interproximal cavities in anterior teeth.
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; FG short 16.5mm; FG long 25mm; RA 22mm; RA long 26mm. -
Taper Round Edge Diamond Burs Fg 10 Pcs/Pk
0$3.50Taper round edge diamond burs FG are used for ceramic and crown preparation.
Available Grits/Colors: Blue/Medium
Head Sizes: 0.1mm – 100mm; Shank Types: FG; Shank Diameter: FG 1.6mm; Total Length: FG 19mm. -
Depth Marking Diamond Burs Fg 10 Pcs/Pk
0$4.20Depth marking diamond burs FG offer non-clogging spiral dual action using a precision engineered head for faster operation and least resistance. They are ideal for fast bulk reduction and a smooth finish.
Available Grits/Colors: Blue/Medium
Head Sizes: 0.1mm – 100mm; Shank Types: FG; Shank Diameter: FG 1.6mm; Total Length: FG 19mm. -
Torpedo Diamond Burs Fg 10 Pcs/Pk
0$3.50Torpedo diamond burs FG are frequently used for tooth preparation, specially designed for cavity preparation.
Available Grits/Colors: Blue/Medium, Red/Fine
Head Sizes: 0.1mm – 100mm; Shank Types: FG; Shank Diameter: FG 1.6mm; Total Length: FG 19mm. -
Football Diamond Burs Fg 10 Pcs/Pk
0$3.50Football diamond burs FG are used for cavity preparation, crown & bridge preparation.
Available Grits/Colors: Black/Super Coarse, Blue/MediumHead Sizes: 0.1mm – 100mm; Shank Types: FG; Shank Diameter: FG 1.6mm; Total Length: FG 19mm. -
Flame Diamond Burs Fg 10 Pcs/Pk
0$3.50Flame diamond burs FG RA are used for sub-gingival curettage (removes necrotic sulcus lining). They can remove sub-gingival calclus for initial root planing.
Available Grits/Colors: Green/Coarse, Blue/Medium, Red/Fine, Yellow/Extra Fine
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; FG short 16.5mm; FG long 25mm; RA 22mm. -
Pear Diamond Burs Fg 10 Pcs/Pk
0$3.50Pear diamond burs FG are best suited for creating access points, preparing cavities and evening splitting roots of smaller teeth. Pear burs are used for excavating, trimming, and finishing in dental applications.
Pear burs are widely used for:
* Cavity preparation
* Creating access points
* Splitting roots of small teeth -
Round End Cone Diamond Burs Fg 196 10 Pcs/Pk
0$3.50Round end cone diamond burs FG RA are used for intra-oral tooth preparation and adjustment.
Available Grits/Colors: Black/Super Coarse, Green/Coarse, Blue/Medium, Red/Fine, Yellow/Extra Fine
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; FG short 16.5mm; FG long 25mm; RA 22mm. -
Flat End Cone Diamond Burs Fg 10 Pcs/Pk
0$3.50The flat end cone diamond burs FG RA are especially designed to make the task of crown & bridge preparation simpler and more efficient.
Available Grits/Colors: Black/Super Coarse, Green/Coarse, Blue/Medium, Red/Fine, Yellow/Extra Fine
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; FG short 16.5mm; FG long 25mm; RA 22mm. -
Needle Diamond Burs Fg 10 Pcs/Pk
0$3.50Needle diamond burs FG RA are used for occlusal reduction, cavity preparation, crown & bridge preparation.
Available Grits/Colors: Black/Super Coarse, Green/Coarse, Blue/Medium, Red/Fine, Yellow/Extra Fine
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; FG short 16.5mm; FG long 25mm; RA 22mm. -
End Cut Diamond Burs Fg 10 Pcs/Pk
0$3.50End cutting diamond burs FG are used to shape the floor of mesial and distal tooth preparations for Class II cavities with smooth sides. These burs reduce the risk of affecting the surface of the adjacent tooth with the bur’s cutting surface. End cutting burs can also be used to shape the pulpal floor of Class I and II cavities while avoiding the risk of a cutting surface meeting the prepared cavity walls.
Available Grits/Colors: Blue/Medium, Red/Fine
Head Sizes: 0.1mm – 100mm; Shank Types: FG; Shank Diameter: FG 1.6mm; Total Length: FG 19mm. -
Round End Cylinder Diamond Burs Fg 10 Pcs/Pk
0$3.50Round end cylinder diamond burs FG RA are used for intra-oral tooth preparation. They apply to cavity preparation & crown preparation.
Available Grits/Colors: Blue/Medium
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; RA 22mm -
Flat End Cylinder Diamond Burs Fg 10 Pcs/Pk
0$3.50Flat end cylinder diamond burs FG RA are used for intra-oral tooth preparation. They apply to cavity preparation & crown preparation.
Available Grits/Colors: Black/Super Coarse, Green/Coarse, Blue/Medium, Red/Fine
Head Sizes: 0.1mm – 100mm; Shank Types: FG, RA; Shank Diameter: FG 1.6mm; RA 2.35mm; Total Length: FG 19mm; FG long 25mm; RA 22mm
