Showing 1–20 of 21 results
-
Max Mill Tungsten Carbide Burs For Milling Machines Hp
0$11.20Tungsten carbide burs for milling machines are used for trimming, polishing implant teeth shoulders, milling precious or non-precious metals or titanium. They recisely match various system with extra-long working life & high cutting capacity.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm -
Round Taper Tungsten Carbide Burs For Milling Machines Hp
0$11.20Tungsten carbide burs for milling machines are used for trimming, polishing implant teeth shoulders, milling precious or non-precious metals or titanium. They recisely match various system with extra-long working life & high cutting capacity.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm -
-
-
Needle Tungsten Carbide Cutters Hp
0$11.20Needle tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Flat End Taper Tungsten Carbide Burs Hp Length 10 Pcs/Pk
0$18.20Flat end taper tungsten carbide burs HP create diverging preparation walls, ideal for indirect restorations. Cross-cut increase cutting efficiency. Dome ends create rounded internal line angles to distribute occlusal forces better. Tapered shape helps maintain full-length enamel rod margins on convex tooth surfaces.
Cut: HP698-HP704 cross cut; HP699L-HP703L cross cut fissure; Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.
-
Flat End Cylinder Tungsten Carbide Burs Hp S31 10 Pcs/Pk
0$18.20Flat end cylinder tungsten carbide burs HP create preparation with parallel walls and a flat floor, useful for establishing the periphery of a preparation. Cross-cuts increase cutting efficiency and facilitate cutting dentin at lower speeds for improved tactile response. Dome ends create rounded internal line angles to distribute occlusal forces
Cut: HP55-HP63 cross cut; HP555-HP563 cross cut fissure; Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Round Cylinder Tungsten Carbide Burs For Milling Machines Hp
0$11.20Tungsten carbide burs for milling machines are used for trimming, polishing implant teeth shoulders, milling precious or non-precious metals or titanium. They recisely match various system with extra-long working life & high cutting capacity.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm -
Pointed End Cylinder Tungsten Carbide Cutters Hp
0$11.20Pointed end cylinder tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Pear Tungsten Carbide Cutters Hp
0$11.20Pear tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Taper Tungsten Carbide Cutters Hp
0$11.20Taper tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Flame Football Tungsten Carbide Cutters Hp
0$11.20Flame football tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Bullet Tungsten Carbide Cutters Hp
0$11.20Bullet tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Ball Round Tungsten Carbide Cutters Hp
0$11.20Ball round tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smo
-
Round End Cylinder Tungsten Carbide Cutters Hp
0$11.20Round end cylinder tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Flat End Cylinder Tungsten Carbide Cutters Hp
0$11.20Flat end cylinder tungsten carbide cutters HP are used for coarse abrasion on gold and other precious metals, leaving a smooth surface on acrylics. Used on gold, composite veneers or ceramics prior to final firing, they always display convincing cutting proper and an impressively long service life.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Round End Cylinder Tungsten Carbide Burs Hp 10 Pcs/Pk
0$18.20Round end cylinder tungsten carbide burs HP are ideal for a quick removal of crowns amalgam and composite materials, and orthodontics, and well suited for jewelry applications.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Flat End Taper Tungsten Carbide Burs Hp 10 Pcs/Pk
0$18.20Flat end taper tungsten carbide burs HP create diverging preparation walls, ideal for indirect restorations. Cross-cut increase cutting efficiency. Dome ends create rounded internal line angles to distribute occlusal forces better. Tapered shape helps maintain full-length enamel rod margins on convex tooth surfaces.
Cut: HP698-HP704 cross cut; HP699L-HP703L cross cut fissure; Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.
-
Flat End Cylinder Tungsten Carbide Burs Hp S21 10 Pcs/Pk
0$18.20Flat end cylinder tungsten carbide burs HP create preparation with parallel walls and a flat floor, useful for establishing the periphery of a preparation. Cross-cuts increase cutting efficiency and facilitate cutting dentin at lower speeds for improved tactile response. Dome ends create rounded internal line angles to distribute occlusal forces
Cut: HP55-HP63 cross cut; HP555-HP563 cross cut fissure; Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm. -
Inverted Cone Tungsten Carbide Burs Hp 10 Pcs/Pk
0$18.20Inverted cone tungsten carbide burs HP are used as excavating burs, ideal for creating mechanical locks in preparations, and well suited for making undercuts in both dental and jewelry applications.
Head Sizes: 0.1mm – 100mm; Shank Types: HP; Shank Diameter: HP 2.35mm; Total Length: HP 44.5mm.
